九州大学出版会 Kyushu University Press

内容紹介

本書は2010年11月に開催された「巨大ひずみナノ材料国際シンポジウム（GSAM2010）のプロシーディングスとして，海外および国内の著名な研究者の基調講演を収録したものである。単一材料で2つ以上の多機能を有する材料創出について取りまとめた世界で初めての試みである。

目次

Preface ・・・・・ Zenji Horita
 
Severe Plastic Deformation Under High Pressure for Production of Multifunctional Properties ・・・・・ Zenji Horita
 
Strength and Electrical Conductivity of Ultrafine Grained Cu Fabricated by Giant Straining Processes ・・・・・ Nobuhiro Tsuji
 
High Strength and High Electrical Conductivity Nanocomposite Metallic Wires Processed by Severe Plastic Deformation:Fabrication, Characterization and Application for High Field Magnets ・・・・・ Ludovic Thilly
 
Strengthening and Electrical Conductivity of Metals with Nanoscale Twins ・・・・・ Lei Lu
 
Investigation of Phase Transformations in Materials Processed by SPD for the Achievement of Multifunctional Materials – Ordering in a Nanostructured FePd Alloy to Achieve a Combination of High Strength and High Coercivity ・・・・・ Xavier Sauvage
 
Multi-functional Ultrafine Grain CuCr Alloys ・・・・・ Alexei Vinogradov
 
Towards Multifunctional Bulk Nanostructures: Grain Boundary Structure and Grain Boundary Diffusivity of Severely Strained Alloys・・・・・Gerhard Wilde
 
Improving the Magnetic Properties in a Bulk Fe-Co-V Alloy by Equal Channel Angular Pressing・・・・・Jing Tao Wang
 
Soft Magnetic and Magnetostrictive Properties of SPD Nanomaterials・・・・・Roland Grossinger
 
Formation of Nanocrystalline Ni-W Alloys by Electrodeposition and Their Mechanical Properties・・・・・Tohru Yamasaki
 
Strengthening Mechanism in Nano-Grained Ultrahigh-Strength Iron-Based Alloy with the Paradox Concept of Lattice Softening・・・・・Tadahiko Furuta
 
Multifunctional Properties of Nanostructured Titanium for Biomedical Application・・・・・Ruslan Z. Valiev
 
Achieving Multifunctionality by Severe Plastic Deformation・・・・・Yuri Estrin
 
Strain Induced Transformation and Annealing Behavior of SUS304 Stainless Steel Processed by HPT・・・・・Minoru Umemoto
 
Bulk SPD Nanomaterials with Enhanced Hydrogen Storage and Thermoelectric Properties・・・・・Michael J. Zehetbauer
 
Hydrogen Storage Properties in Bulk Mg and Mg-Based Hydrides Processed by Severe Plastic Deformation・・・・・Walter J. Botta
 
Hydrogen Embrittlement Behavior of Bulk Nanostructured Pure Fe Produced by High-Pressure Torsion Straining・・・・・Yoshikazu Todaka
 
Developing Superplasticity through Severe Plastic Deformation・・・・・Terence G. Langdon
 
The Increase in Toughness at Low Temperatures by Severe Plastic Deformation・・・・・Kenji Higashida
 
Multi Directional Forging of AZ91MG Alloy and the Specific Mechanical Properties・・・・・Hiromi Miura
 
Nanomaterials for Nuclear Power Applications: Advantages and Challenges・・・・・Yuntian T. Zhu
 
Radiation Resistance of Nanostructured Materials: Case of Austenitic Stainless Steels・・・・・Auriane Etienne
 
Applications of ECAP Consolidation in Solid-State Recycling・・・・・Kenong Xia
 
ECAP of CNT Reinforced Metal Matrix Composites: Processing and Properties・・・・・Hyoung Seop Kim
 
Creation of Harmonic Structured Materials with Outstanding Mechanical Properties・・・・・Kei Ameyama
 
Effect of Grain Refinement by SPD on Elastic Properties of TiNi・・・・・Koichi Tsuchiya
 
Multifunctional Shape Memory Alloys Processed by SPD・・・・・Thomas Waitz

<Poster Presentation>
 
Effect of Processing Route on Microstructure in ECAPed Al-5mass% Ti Alloy・・・・・Motoo Furukawa, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe
 
Mechanical Properties of Binary Ni3Al Deformed by High-Pressure Torsion・・・・・Octav Ciuca, Koichi Tsuchiya and Yoshihiko Yokoyama
 
Evolution of Mechanical Properties, Microstructures and Hydrogen Storage Capability in Pure Magnesium Processed by High-Pressure Torsion・・・・・Kaveh Edalati, Zenji Horita, Akito Yamamoto and Tatsumi Ishihara
 
Grain Boundary Segregation in Ultrafine Grained Al Alloys・・・・・Seiichiro Ii, Koichi Tsuchiya and Nobuhiro Tsuji
 
Microstructure and Property of Pure Cu Processed by Surface Rolling・・・・・Qingsong Mei, Koichi Tsuchiya, Hong Gao and Kaneaki Tsuzaki
 
Fracture Behavior Transition by Change of Strain Rate in Cold Rolled and Annealed Si Steels・・・・・Takashi Mizuguchi, Rintaro Ueji, Hayato Miyagawa, Yasuhiro Tanaka and Kazunari Shinagawa
 
Phase Transformation Behavior in Deformation-Induced Layer Formed by Shot-Peening Fe-Ni Alloys・・・・・Hisashi Sato, Takayuki Nishimura, Eri Miura-Fujiwara and Yoshimi Watanabe
 
Formation Mechanism of Grain Boundaries under Severe Plastic Deformation by Atomic Stimulations・・・・・Tomotsugu Shimokawa
 
Crystallographic Aspect of .-Martensite Transformation of High-Mn Metastable Austenitic Steel with Fine Grained Microstructure・・・・・Rintaro Ueji, Daisuke Kondo, Takashi Mizuguchi, Yasuhiro Tanaka and Kazunari Shinagawa
 
Simultaneous Strengthening of Grain Refinement and Fine Precipitation in Al-Mg-Si Alloys through Processing by High-Pressure Torsion ・・・・・Daichi Akama, Zenji Horita, Kenji Matsuda and Shoichi Hirosawa
 
Al-Al2O3 Nanocomposites Produced through Consolidation by High-Pressure Torsion・・・・・Maki Ashida, Zenji Horita, Takuji Kita and Akira Kato
 
Mechanical and Electrical Properties of Al-Fe Alloys Processed by High-Pressure Torsion・・・・・Jorge Cubero and Zenji Horita
 
High-Pressure Sliding for Production of Superplastic AZ61 Mg Alloy・・・・・Shuji Honda and Zenji Horita
 
Microstructure and Mechanical Properties of the Ultrafine-Grained SUS304 Produced by Multi Directional Forging・・・・・Y.Iwabuchi and H.Miura

 
Application of High-Pressure Torsion to Superconducting MgB2 for Improving Critical Current Density・・・・・Hideaki Iwaoka, Zenji Horita, Masayoshi Inoue and Takanobu Kisu
 
Effect of Strain Rate on Microstructural Change during Multi Directional Forging of AZ61 Magnesium Alloy・・・・・K.Matsumoto and H.Miura
 
Microstructure Evolution of Crystallized Zr-Cu-Al Metallic Glass by High Pressure Torsion・・・・・Fanqiang Meng, Koichi Tsuchiya, Yoshihiro Yokoyama
 
Controlling Magnetic Properties of Cu-Fe Alloys by High-Pressure Torsion・・・・・Shingo Nishihata, Makoto Arita and Zenji Horita
 
Strain Hardening and Fracture Behavior of SUS304L and SUS316L Austenitic Strainless Steel Compacts with Harmonic Microstruture・・・・・Muhammad Rifai, Hiroshi Kobayakawa, Hiroshi Fujiwara, Akira Ueno and Kei Ameyama
 
Dual Effect of Grain Refinement by High-Pressure Torsion and Fine Precipitation by Aging on Strengthening Al2091 Alloy・・・・・Seungwon Lee, Daichi Akama and Zenji Horita
 
Suppression of Grain Growth by Precipitation of Co-Fe Particles during Aging of an ECAPed Cu Alloy・・・・・Takako Sumiya, Toshiyuki Fujii, Hisashi Sato and Yoshimi Watanabe
 
Superplasticity of Al-3%Mg-0.2%Sc Alloy Processed by High-Pressure Sliding ・・・・・Kiyonari Tazoe and Zenji Horita
 
Microstructural Evolution Caused by Accumulative Roll-Bonding of Cu(100)[001] Single Crystals・・・・・Akari Yoshida, Yoji Miyajima, Toshiyuki Fujii, Susumu Onaka and Masaharu Kato
 
A Comparative Study of the Annealing Behavior of HPTed Austenitic Stainless Steels・・・・・I.Shuro, H.C.Wang, M.Umemoto, H.H.Kuo and Y.Todaka
 
General Discussion (Points to note and discuss)

著者紹介

堀田善治（ほりた　ぜんじ）
1977年，九州大学工学部鉄鋼冶金学科卒業。
1979年，同大学大学院工学研究科材料開発工学専攻修士課程修了。
1983年，南カリフォルニア大学大学院材料科学科博士課程修了。
同大学大学院材料科学科研究員，九州大学工学部助手・助教授，
アリゾナ州立大学高分子分解能電子顕微鏡センター客員教授などを経て，
2001年より九州大学大学院工学研究院教授。
現在，九州大学大学院工学研究院材料工学部門主幹教授。